Administrator Guide

Layer 3 Routing Commands 1637
show ipv6 mld host-proxy groups detail
Use the show ipv6 mld host-proxy groups detail command to display
information about multicast groups that MLD Proxy reported.
Syntax
show ipv6 mld host-proxy groups detail
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec, Configuration mode and all Configuration submodes
User Guidelines
The following parameters are displayed by this command:
Field Description
Interface The interface number of the MLD-Proxy.
Group Address The IP address of the multicast group.
Last Reporter The IP address of the host that last sent a membership report for
the current group on the network attached to the MLD Proxy
interface (upstream interface).
Up Time (in
secs)
The time elapsed in seconds since last created.
Member State Possible values are:
• Idle_Member—The interface has responded to the latest group
membership query for this group.
• Delay_Member—The interface is going to send a group
membership report to respond to a group membership query for
this group.
Filter Mode Possible values are Include or Exclude.
Sources The number of sources attached to the multicast group.
2CSNXXX_SWUM204.book Page 1637 Monday, January 25, 2016 1:25 PM