Administrator Guide

Dell Networking CLI 162
neighbor prefix-list (IPv6
Address Family
Configuration)
Specifies an IPv6 prefix list to filter routes
received from or advertised to a given peer.
IPAF
neighbor remote-as Configures a neighbor and identify the
neighbor’s autonomous system.
BR
neighbor remove-private-as Removes private AS numbers when
advertising IPv4 routes to an external peer.
BR
neighbor rfc5549-support Enables advertisement of IPv4 routes over IPv6
next hops selectively to an external BGP IPv6
peer.
BR
neighbor route-map (BGP
Router Configuration)
Applies a route map to incoming or
outgoing routes for a specific neighbor.
BR
neighbor route-map (IPv6
Address Family
Configuration)
Specifies a route map to be applied to
inbound or outbound IPv6 routes.
IPAF
neighbor route-reflector-
client (BGP Router
Configuration)
Configures an internal peer as an IPv4
route reflector client.
BR
neighbor route-reflector-
client (IPv6 Address Family
Configuration)
Configures an internal peer as an IPv4
route reflector client.
IPAF
neighbor send-community
(BGP Router
Configuration)
Configures the local router to send the
BGP communities attribute in UPDATE
messages to a specific neighbor.
BR
neighbor send-community
(IPv6 Address Family
Configuration)
Tells BGP to send the COMMUNITIES
attribute with routes advertised to the peer.
IPAF
neighbor shutdown Administratively disables communications
with a specific BGP neighbor.
BR,
IPAF
neighbor timers Overrides the global keepalive and hold
timer values as well as set the keepalive and
hold timers for a specific neighbor.
BR
neighbor update-source Configures BGP to use a specific IP address
as the source address for the TCP
connection with a neighbor.
BR
Command Description Mode
a
2CSNXXX_SWUM204.book Page 162 Monday, January 25, 2016 1:25 PM