Administrator Guide

Layer 3 Routing Commands 1641
Example
console#show ipv6 mld traffic
Valid MLD Packets Received..................... 52
Valid MLD Packets Sent......................... 7
Queries Received............................... 0
Queries Sent................................... 7
Reports Received............................... 52
Reports Sent................................... 0
Leaves Received................................ 0
Leaves Sent.................................... 0
show ipv6 nd raguard policy
Use this command to display the RA Guard policy on all interfaces for which
it is enabled.
Syntax
show ipv6 nd raguard policy
Default Configuration
By default, no RA guard policies are applied to any interface.
Command Mode
Privileged Exec, Global Configuration
User Guidelines
This command has no user guidelines.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following example configures an unnamed RA Guard policy to drop all
RA advertisements and router redirect messages on interface Gi1/0/1 (VLAN
10). The configured interfaces are shown.
console(config)#vlan 10
2CSNXXX_SWUM204.book Page 1641 Monday, January 25, 2016 1:25 PM