Administrator Guide

Layer 3 Routing Commands 1643
IPv6 Address MAC Address isRtr State Updated
Interface
-------------------- ----------------- ----- ------- ---------
show ipv6 protocols
Use the show ipv6 protocols command to display information about the
configured IPv6 routing protocols
Syntax
show ipv6 protocols
Default Configuration
There is no default configuration for this command.
Command Mode
Priveleged Exec mode, Global Configuration mode, all Configuration sub-
modes.
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 protocols
Routing Protocol .............................. BGP
BGP Router ID ................................. 255.255.255.255
Local AS Number ............................... 1
BGP Admin Mode ................................ Enable
Maximum Paths ................................. Internal 3, External 2
Always compare MED ............................ TRUE
Maximum AS Path Length ........................ 100
Fast Internal Failover ........................ Disable
Fast External Failover ........................ Disable
Distance ...................................... Ext 126, Int 127, Local 126
Prefix List In ................................ none
Prefix List Out ............................... none
Redistributing:
2CSNXXX_SWUM204.book Page 1643 Monday, January 25, 2016 1:25 PM