Administrator Guide

Dell Networking CLI 163
network (BGP Router
Configuration)
Configures BGP to advertise an address
prefix.
BR
network (IPv6 Address
Family Configuration)
Identifies network IPv6 prefixes that BGP
originates in route advertisements to its
neighbors.
IPAF
redistribute (BGP Router
Configuration)
Configures BGP to advertise routes learned
by means outside of BGP. BGP can
redistribute local (connected), static,
OSPF, and RIP routes.
BR
redistribute (IPv6 Address
Family Configuration)
Configures BGP to redistribute non-BGP
routes from the IPv6 routing table.
IPAF
route-target Creates a list of export, import, or both
route target (RT) extended communities
for the specified VRF instance.
PE
set extcommunity rt Sets BGP extended community attributes
for the route target.
RMC
set extcommunity soo Sets BGP extended community attributes
for the site of origin.
RMC
show bgp ipv6 Displays IPv6 routes in the BGP routing
table.
UE,
PE,
GC
show bgp ipv6 aggregate-
address
Displays the configured IPv6 aggregate
addresses and indicates if each address is
currently active.
PE
show bgp ipv6 community Displays the IPv6 routes that belong to the
specified set of communities.
PE
show bgp ipv6 community-
list
Displays the IPv6 routes that match a
specified community list.
PE
show bgp ipv6 listen range Displays information about IPv6 BGP
listen ranges.
PE
show bgp ipv6 neighbors Displays neighbors with IPv4 or IPv6 peer
addresses that are enabled for the exchange
of IPv6 prefixes.
PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 163 Monday, January 25, 2016 1:25 PM