Administrator Guide

Layer 3 Routing Commands 1678
show ip pim
The show ip pim command displays information about the interfaces
enabled for PIM.
Syntax
show ip pim
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Configuration mode and all Configuration
submodes
User Guidelines
The following information is displayed:
Example
console#show ip pim
PIM Mode............................. None
If no routers are enabled for PIM, the following message is displayed.
None of the routing interfaces are enabled for PIM.
show ip pim bsr-router
The show ip pim bsr-router command displays information about a bootstrap
router (BSR).
Syntax
show ip pim bsr-router {candidate|elected}
Field Description
PIM Mode The routers that are enabled for PIM.
2CSNXXX_SWUM204.book Page 1678 Monday, January 25, 2016 1:25 PM