Administrator Guide

Layer 3 Routing Commands 1685

Default configuration

There is no default configuration for this command.

Command Mode

Privileged Exec modes, Global Configuration mode and all submodes

User Guidelines

This command only displays output if pim sparse-mode is enabled.

The following statistics are displayed.

Example

console#show ip pim statistics

=====================================================================

Interface Stat Hello Register Reg-Stop Join/Pru BSR Assert CRP

=====================================================================

Vl10 Rx 0 0 0 0 0 0 0

Tx 2 0 0 0 0 0 0

Invalid Packets Received - 0

---------------------------------------------------------------------

Vl20 Rx 0 0 0 5 0 0 0

Tx 8 7 0 0 0 0 0

Invalid Packets Received - 0

Field Description

Stat Rx: Packets received.

Tx: Packets transmitted.

Interface The PIM enabled routing interface.

Hello Number of PIM Hello messages.

Reg-Stop Number of PIM Register-Stop messages.

Join/Pru Number of PIM Join/Prune messages.

BSR Number of PIM Boot Strap messages.

Assert Number of PIM Assert messages

CRP Number of PIM Candidate RP Advertaisment messages.

2CSNXXX_SWUM204.book Page 1685 Monday, January 25, 2016 1:25 PM