Administrator Guide

Dell Networking CLI 167
DHCP Server and Relay Agent (IPv4)
set comm-list delete Removes BGP communities from an
inbound or outbound UPDATE message.
RM
set community Modifies the communities attribute of
matching routes.
RM
set ipv6 next-hop (BGP) Sets the IPv6 next hop of a route. RM
set local-preference Sets the local preference of specific BGP
routes.
RM
set metric Sets the metric of a route. RM
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
ip dhcp pool Defines a DHCP address pool that can be used
to supply addressing information to DHCP
client. This command puts the user into DHCP
Pool Configuration mode.
GC
bootfile Sets the name of the image for the DHCP
client to load.
DP
clear ip dhcp binding Removes automatic DHCP server bindings. PE
clear ip dhcp conflict Removes DHCP server address conflicts. PE
client-identifier Identifies a a Microsoft
®
DHCP client to be
manually assigned an address.
DP
client-name Specifies the host name of a DHCP client. DP
default-router Sets the IPv4 address of one or more routers for
the DHCP client to use.
DP
dns-server (IP DHCP Pool
Config)
Sets the IPv4 DNS server address which is
provided to a DHCP client by the DHCP server.
DP
domain-name (IP DHCP
Pool Config)
Sets the DNS domain name which is provided
to a DHCP client by the DHCP server.
DP
hardware-address Specifies the MAC address of a client to be
manually assigned an address.
DP
Command Description Mode
a
2CSNXXX_SWUM204.book Page 167 Monday, January 25, 2016 1:25 PM