Administrator Guide

Layer 3 Routing Commands 1692
• priority —The election priority (Range: 0–2147483647).
Default Configuration
The default election priority is 1.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pim dr-priority 10
ipv6 pim hello-interval
Use the ipv6 pim hello-interval command to configure the PIM-SM Hello
Interval for the specified interface. Use the no form of this command to set
the hello interval to the default.
Syntax
ipv6 pim hello-interval interval
no ipv6 pim hello-interval
• interval—The hello interval (Range: 0–18000 seconds).
Default Configuration
The default hello interval is 30 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Setting the hello interval to 0 disables sending on PIM Hellos.
2CSNXXX_SWUM204.book Page 1692 Monday, January 25, 2016 1:25 PM