Administrator Guide

Dell Networking CLI 168
host Specifies a manual binding for a DHCP client
host.
DP
ip dhcp bootp automatic Enables automatic BOOTP address
assignments.
GC
ip dhcp conflict logging Enables DHCP address conflict detection. GC
ip dhcp excluded-address Excludes one or more DHCP addresses from
automatic assignment.
GC
ip dhcp ping packets Configures the number of pings sent to detect if
an address is in use prior to assigning an address
from the DHCP pool.
GC
lease Sets the period for which a dynamically
assigned DHCP address is valid.
DP
netbios-name-server Configures the IPv4 address of the Windows
®
Internet Naming Service (WINS) for a
Microsoft DHCP client.
DP
netbios-node-type Sets the NetBIOS node type for a Microsoft
DHCP client.
DP
network Defines a pool of IPv4 addresses for distributing
to clients.
DP
next-server Sets the IPv4 address of the TFTP server to be
used during auto-install.
DP
option Supplies arbitrary configuration information to
a DHCP client.
DP
service dhcp Enables local IPv4 DHCP server on the switch. GC
sntp Sets the IPv4 address of the NTP server to be
used for time synchronization of the client.
DP
show ip dhcp binding Displays the configured DHCP bindings. PE
show ip dhcp conflict Displays DHCP address conflicts for all relevant
interfaces or a specified interface.
PE
show ip dhcp global
configuration
Displays the DHCP global configuration. PE
show ip dhcp pool Displays the configured DHCP pool or pools. UE or
PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 168 Monday, January 25, 2016 1:25 PM