Administrator Guide

Layer 3 Routing Commands 1703
console#show ipv6 mroute group FF43::5
Multicast Route Table
Expiry Up Time
Source IP Group IP (mm:ss) (hh:mm:ss) RPF Neighbor Flags
--------------- --------------- -------- ----------- --------------- -----
* FF43::5 00:00 00:01:00 :: RPT
2001::5 FF43::5 02:54 00:00:35 2001::5 SPT
console#show ipv6 mroute group FF43::5 summary
Multicast Route Table Summary
Source IP Group IP Protocol IIF OIF Expiry
--------------- --------------- -------- --------- --------- ------
* FF43::5 PIMSM Vl11
Vl13
2001::5 FF43::5 PIMSM Vl12 Vl11
Vl13
show ipv6 mroute source
Use the show ipv6 mroute source command in Privileged Exec mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
sourceipaddr or sourceipaddr | groupipaddr pair value(s).
Syntax
show ipv6 mroute source sourceipaddr {summary | groupipaddr }
• sourceipaddr — IP address of source.
•
groupipaddr — IP address of multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
2CSNXXX_SWUM204.book Page 1703 Monday, January 25, 2016 1:25 PM