Administrator Guide

Layer 3 Routing Commands 1706
Slot/Port...................................... vlan 6
Neighbor Address............................... FE80::200:FF:FE00:33
Up Time (hh:mm:ss)............................. 00:00:12
Expiry Time (hh:mm:ss)......................... 00:01:34
DR Priority.................................... 0
show ipv6 pim rp-hash
Use the show ipv6 pim rp-hash command to display which rendezvous point
(RP) is being selected for a specified group.
Syntax
show ipv6 pim rp-hash group-address
group-address
—Group IP address supported by RP.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim rp-hash ff1e::/64
RP Type
Address
------------------------ -----
3001::1 BSR
show ipv6 pim rp mapping
Use the show ipv6 pim rp mapping command to display all group-to-RP
mappings of which the router is aware (either configured or learned from the
bootstrap router (BSR). If no RP is specified, all active RPs are displayed
2CSNXXX_SWUM204.book Page 1706 Monday, January 25, 2016 1:25 PM