Administrator Guide

Layer 3 Routing Commands 1707
Syntax
show ipv6 pim rp mapping [ rp-address | candidate | static ]
• rp-address —IP address of RP.
• candidate—Show candidate rendezvous point mappings.
• static—Show static rendezvous point mappings.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim rp mapping
Group Address.................................. FF1E::/64
RP Address..................................... 2001::1
origin......................................... Static
Group Address.................................. FF1E::/64
RP Address..................................... 3001::1
origin......................................... BSR
show ipv6 pim statistics
Use the show ipv6 pim statistics command to display the count of IPv6 PIM
sparse mode received control packets.
Syntax
show ipv6 pim statistics [ vlan vlan-id ]
• vlan vlan-id —The VLAN for which to display spare mode statistics.
Default Configuration
This command has no defaults.
2CSNXXX_SWUM204.book Page 1707 Monday, January 25, 2016 1:25 PM