Administrator Guide

Layer 3 Routing Commands 1708

Command Mode

Privileged Exec mode, Global Configuration mode, all sub-modes.

User Guidelines

This command only displays output if pim sparse-mode is enabled.

The following counters are displayed in the output.

Example

console#show ipv6 pim statistics

=====================================================================

Interface Stat Hello Register Reg-Stop Join/Pru BSR Assert CRP

=====================================================================

Vl10 Rx 0 0 0 0 0 0 0

Tx 2 0 0 0 0 0 0

Invalid Packets Received - 0

---------------------------------------------------------------------

Vl20 Rx 0 0 0 5 0 0 0

Tx 8 7 0 0 0 0 0

Invalid Packets Received - 0

---------------------------------------------------------------------

1/0/5 Rx 0 0 6 5 0 0 0

Tx 10 9 0 0 0 0 0

Field Description

Stat Rx :Packets received.

Tx: Packets transmitted.

Interface The PIM enabled routing interface.

Hello Number of PIM Hello messages.

Reg-Stop Number of PIM Register-Stop messages.

Join/Pru Number of PIM Join/Prune messages.

BSR Number of PIM Boot Strap messages.

Assert Number of PIM Assert messages.

CRP Number of PIM Candidate RP Advertisement messages.

2CSNXXX_SWUM204.book Page 1708 Monday, January 25, 2016 1:25 PM