Administrator Guide

Dell Networking CLI 175
IP Routing
Command Description Mode
a
encapsulation Configures the link layer encapsulation type for
the packet.
IC
ip address Configures an IP address on an interface. IC
ip netdirbcast E nables the forwarding of network-directed
broadcasts.
IC
ip policy route-map Applies a route map on an interface. IC
ip redirects Enables the generation of ICMP Redirect
messages.
IC
ip route Configures a static route. Use the no form of
the command to delete the static route.
GC
ip route default Configures the default route. Use the no form
of the command to delete the default route.
GC
ip route distance Sets the default distance (preference) for static
routes.
GC
ip routing Globally enables IPv4 routing on the router. GC
ip unnumbered Identifies an interface as an unnumbered
interface and specifies the numbered
interface providing the borrowed address.
IC
ip unnumbered gratuitous-
arp accept
Enables installation of a static interface
route to the unnumbered peer upon
receiving a gratuitous ARP.
IC
ip unreachables Enables the generation of ICMP
Destination Unreachable messages.
IC
match ip address Specify IP address match criteria for a route
map.
RM
match length Configures packet length matching criteria for a
route map.
RM
match mac-list Configures MAC ACL match criteria for a route
map.
RM
route-map Creates a policy based route map. GC
set interface null0 Routes packets to interface null 0. RM
2CSNXXX_SWUM204.book Page 175 Monday, January 25, 2016 1:25 PM