Administrator Guide

Layer 3 Routing Commands 1782
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example #1
The following example displays the information for the IFO object or virtual
interface tables associated with VLAN 10.
console#show ip ospf interface vlan 10
IP Address..................................... 1.1.1.1
Subnet Mask.................................... 255.255.255.0
Secondary IP Address(es).......................
OSPF Admin Mode................................ Enable
OSPF Area ID................................... 0.0.0.0
OSPF Network Type.............................. Broadcast
Router Priority................................ 1
Retransmit Interval............................ 5
Hello Interval................................. 10
Dead Interval.................................. 40
LSA Ack Interval............................... 1
Iftransit Delay Interval....................... 1
Authentication Type............................ None
Metric Cost.................................... 10 (computed)
Passive Status................................. Non-passive interface
OSPF Mtu-ignore................................ Disable
State.......................................... designated-router
Designated Router.............................. 1.1.1.1
Backup Designated Router....................... 0.0.0.0
Number of Link Events.......................... 2
Example #2
The following example shows the configuration of flood blocking.
console#show ip ospf interface gi2/0/11
2CSNXXX_SWUM204.book Page 1782 Monday, January 25, 2016 1:25 PM