Administrator Guide

Layer 3 Routing Commands 1785
Example
The following example displays the ospf statistics for VLAN 15.
console>show ip ospf interface stats vlan 15
OSPF Area ID....................................... 0.0.0.0
Area Border Router Count................................. 0
AS Border Router Count................................... 0
Area LSA Count........................................... 1
IP Address......................................... 2.2.2.2
OSPF Interface Events.................................... 1
Virtual Events........................................... 0
Neighbor Events.......................................... 0
External LSA Count....................................... 0
show ip ospf lsa-group
Use this command to display the number of self-originated LSAs within each
LSA group.
Syntax
show ip ospf lsa-group [vrf vrf-name ]
• vrf-name—The name of the VRF instance from which to display the self-
originated LSA groups.
Default Configuration
There are no self-originated LSA groups by default.
Command Mode
Privileged EXEC, Global Configuration, and all sub-modes
User Guidelines
The following fields are displayed:
Field Description
Total self-
originated LSAs
The number of LSAs the router is currently originating.
2CSNXXX_SWUM204.book Page 1785 Monday, January 25, 2016 1:25 PM