Administrator Guide

Layer 3 Routing Commands 1792
• vrf-name —The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N4000 series switches.
This command outputs the following.
Field Description
Delta T The time since the routing table was computed, in hours, minutes,
and seconds (hh:mm:ss).
Intra The time taken to compute intra-area routes, in milliseconds.
Summ The time taken to compute inter-area routes, in milliseconds.
Ext The time taken to compute external routes, in milliseconds.
SPF Total The total time to compute routes, in milliseconds. The total may
exceed the sum of the Intra, Summ, and Ext times.
RIB Update The time from the completion of the routing table calculation until
all changes have been made in the common routing table (the
Routing Information Base, or RIB), in milliseconds.
2CSNXXX_SWUM204.book Page 1792 Monday, January 25, 2016 1:25 PM