Administrator Guide

Layer 3 Routing Commands 1795
• vrf-name —The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N4000 series switches.
The clear ip ospf counters command does not clear the message queue high
water marks.
The following is output.
Parameter Description
OSPFv2 Packet
Statistics
The number of packets of each type sent and received since
OSPF counters were last cleared.
LSAs Retransmitted The number of LSAs retransmitted by this router since OSPF
counters were last cleared.
LS Update Max
Receive Rate
The maximum rate of LS Update packets received during any
5-second interval since OSPF counters were last cleared. The
rate is in packets per second.
LS Update Max
Send Rate
The maximum rate of LS Update packets transmitted during
any 5-second interval since OSPF counters were last cleared.
The rate is in packets per second.
Number of LSAs
Received
The number of LSAs of each type received since OSPF
counters were last cleared.
OSPFv2 Queue
Statistics
For each OSPFv2 message queue, the current count, the high
water mark, the number of packets that failed to be enqueued,
and the queue limit. The high water marks are not cleared when
OSPF counters are cleared.
2CSNXXX_SWUM204.book Page 1795 Monday, January 25, 2016 1:25 PM