Administrator Guide

Layer 3 Routing Commands 1796
Example
console# show ip ospf traffic
Time Since Counters Cleared: 4000 seconds
OSPFv2 Packet Statistics
Hello Database Desc LS Request LS Update LS ACK Total
Recd: 500 10 20 50 20 600
Sent: 400 8 16 40 16 480
LSAs Retransmitted................0
LS Update Max Receive Rate........20 pps
LS Update Max Send Rate...........10 pps
Number of LSAs Received
T1 (Router).......................10
T2 (Network)......................0
T3 (Net Summary)..................300
T4 (ASBR Summary).................15
T5 (External).....................20
T7 (NSSA External)................0
T9 (Link Opaque)..................0
T10 (Area Opaque).................0
T11 (AS Opaque)...................0
Total.............................345
OSPFv2 Queue Statistics
Current Max Drops Limit
Hello 0 10 0 500
ACK 2 12 0 1680
Data 24 47 0 500
Event 1 8 0 1000
show ip ospf virtual-link
Use the show ip ospf virtual-link command in Privileged EXEC mode to
display the OSPF Virtual Interface information for a specific area and
neighbor or for all.
Syntax
show ip ospf virtual-link [vrf vrf-name ] [ area-id neighbor-id ]
2CSNXXX_SWUM204.book Page 1796 Monday, January 25, 2016 1:25 PM