Administrator Guide

Layer 3 Routing Commands 1798
show ip ospf virtual-links brief
Use the show ip ospf virtual-link brief command in Privileged EXEC mode
to display the OSPF Virtual Interface information for all areas in the system
in table format.
Syntax
show ip ospf virtual-link brief
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information in
the system.
console#show ipv6 ospf virtual-link brief
Hello Dead Retransmit Transit
Area ID Neighbor Interval Interval Interval Delay
------- -------- -------- -------- ---------- -------
0.0.0.2 5.5.5.5 10 40 5 1
timers pacing flood
Use the timers pacing flood command in router OSPF Global Configuration
mode to adjust the rate at which OSPFv2 sends LS Update packets.
Use the no form of the command to return the timer pacing to the default
value.
Syntax
timers pacing flood milliseconds
2CSNXXX_SWUM204.book Page 1798 Monday, January 25, 2016 1:25 PM