Administrator Guide

Layer 3 Routing Commands 1848
show ipv6 ospf database database-summary
Use the show ipv6 ospf database database-summary command in Privileged
Exec mode to display the number of each type of LSA in the database and the
total number of LSAs in the database.
Syntax
show ipv6 ospf database database-summary
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the number of each type of LSA in the
database and the total number of LSAs in the database.
console#show ipv6 ospf database database-summary
OSPF Router with ID (0.0.0.2)
Router database summary
Router......................................... 0
Network........................................ 0
Inter-area Prefix.............................. 0
Inter-area Router.............................. 0
Type-7 Ext..................................... 0
Link........................................... 0
Intra-area Prefix.............................. 0
Link Unknown................................... 0
Area Unknown................................... 0
AS Unknown..................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Total.......................................... 0
2CSNXXX_SWUM204.book Page 1848 Monday, January 25, 2016 1:25 PM