Administrator Guide

Layer 3 Routing Commands 1850
OSPF cannot be initialized on this interface.
show ipv6 ospf interface brief
Use the show ipv6 ospf interface brief command in Privileged Exec mode to
display brief information for the IFO object or virtual interface tables.
Syntax
show ipv6 ospf interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays brief ospf interface information.
console#show ipv6 ospf interface brief
Hello Dead Retrax LSA
Admin Router Int. Int. Int. Retrax Ack
Interface Mode Area ID Prior. Cost Val. Val. Val. Delay Intval
--------- -------- -------- ------ ----- ----- ----- ------ ------ -----
show ipv6 ospf interface stats
Use the show ipv6 ospf interface stats command in User Exec mode to
display the statistics for a specific interface. The command only displays
information if OSPF is enabled.
Syntax
show ipv6 ospf interface stats vlan vlan-id
• vlan-id — Valid VLAN ID.
2CSNXXX_SWUM204.book Page 1850 Monday, January 25, 2016 1:25 PM