Administrator Guide

Dell Networking CLI 184
OSPF
show ip mroute source Displays the multicast configuration
settings
PE
show ipv6 pim interface Displays interface config parameters. PE or
GC
show ipv6 pim neighbor Displays IPv6 PIMSM neighbors learned on the
routing interfaces.
PE or
GC
show ipv6 pim rp-hash Displays which rendezvous point (RP) is being
selected for a specified group.
PE or
GC
show ipv6 pim rp mapping Displays all group-to-RP mappings of which the
router is aware (either configured or learned
from the bootstrap router (BSR).
PE or
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
area default-cost (Router
OSPF)
Configures the advertised default cost for the
stub area.
ROSPF
area nssa (Router OSPF) Configures the specified area ID to function as an
NSSA.
ROSPF
area nssa default-info-
originate (Router OSPF
Config)
Configures the metric value and type for the
default route advertised into the NSSA.
ROSPF
area nssa no-redistribute Configures the NSSA Area Border router (ABR)
so that learned external routes are not
redistributed to the NSSA.
ROSPF
area nssa no-summary Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSPF
area nssa translator-role Configures the translator role of the NSSA. ROSPF
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSPF
area range (Router OSPF) Creates a specified area range for a specified
NSSA.
ROSPF
Command Description Mode
a
2CSNXXX_SWUM204.book Page 184 Monday, January 25, 2016 1:25 PM