Administrator Guide

Layer 3 Routing Commands 1871
Example
console(config-router)#enable
hostroutesaccept
Use the hostroutesaccept command in Router RIP Configuration mode to
enable the RIP hostroutesaccept mode. Use the no form of the command to
disable the RIP hostroutesaccept mode.
Syntax
hostroutesaccept
no hostroutesaccept
Default Configuration
Enabled is the default configuration.
Command Mode
Router RIP Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config-router)#hostroutesaccept
ip rip
Use the ip rip command in Interface Configuration mode to enable RIP on a
router interface. Use the no form of the command to disable RIP on the
interface.
Syntax
ip rip
no ip rip
2CSNXXX_SWUM204.book Page 1871 Monday, January 25, 2016 1:25 PM