Administrator Guide

Layer 3 Routing Commands 1878
show ip rip interface
Use the show ip rip interface command in Privileged Exec mode to display
information related to a particular RIP interface.
Syntax
show ip rip interface vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays information related to the VLAN 15 RIP
interface.
console#show ip rip interface vlan 15
Interface...................................... 15
IP Address..................................... -----
Send version................................... RIP-2
Receive version................................ Both
RIP Admin Mode................................. Disable
Link State..................................... -----
Authentication Type............................ MD5
Authentication Key............................. "pass123"
Authentication Key ID.......................... 35
Bad Packets Received........................... -----
Bad Routes Received............................ -----
Updates Sent................................... -----
2CSNXXX_SWUM204.book Page 1878 Monday, January 25, 2016 1:25 PM