Administrator Guide

Layer 3 Routing Commands 1888
description
This optional command assigns descriptive text to the VRF instance.
Syntax
description text
• text—Descriptive text. Enclose the description in quotes if embedded
blanks are desired.
Default Configuration
No descriptive text is assigned.
Command Mode
Virtual Router Configuration
– show ip vrf
bootpdhcprelay maxhopcount ip dhcp snooping limit
bootpdhcprelay minwaittime ip dhcp snooping log-invalid
ip address-conflict-detect run ip dhcp snooping trust
ip default-gateway ip dhcp snooping verify mac-address
ip dhcp relay information check
ip helper-address (global configuration)
ip dhcp relay information check-reply ip helper-address (interface configuration)
ip dhcp relay information option ip icmp echo-reply
ip dhcp relay information option-insert ip icmp error-interval
ip dhcp snooping ip redirects
ip dhcp snooping binding ip routing
ip dhcp snooping database ping
ip dhcp snooping database write-delay
traceroute
2CSNXXX_SWUM204.book Page 1888 Monday, January 25, 2016 1:25 PM