Administrator Guide

Dell Networking CLI 189
OSPFv3
Command Description Mode
a
area default-cost (Router
OSPFv3)
Configures the monetary default cost for the stub
area.
ROSV3
area nssa (Router
OSPFv3)
Configures the specified areaid to function as an
NSSA.
ROSV3
area nssa default-info-
originate (Router
OSPFv3 Config)
Configures the metric value and type for the
default route advertised into the NSSA.
ROSV3
area nssa no-redistribute Configures the NSSA ABR so that learned
external routes will not be redistributed to the
NSSA.
ROSV3
area nssa no-summary Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSV3
area nssa translator-role Configures the translator role of the NSSA. ROSV3
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSV3
area range (Router
OSPFv3)
Creates an area range for a specified NSSA. ROSV3
area stub Creates a stub area for the specified area ID. ROSV3
area stub no-summary Disables the import of Summary LSAs for the
stub area identified by
areaid.
ROSV3
area virtual-link Creates the OSPF virtual interface for the
specified
areaid and neighbor .
ROSV3
area virtual-link dead-
interval
Configures the dead interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor .
ROSV3
area virtual-link hello-
interval
Configures the hello interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor .
ROSV3
area virtual-link
retransmit-interval
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by
areaid and neighbor .
ROSV3
2CSNXXX_SWUM204.book Page 189 Monday, January 25, 2016 1:25 PM