Administrator Guide

Layer 3 Routing Commands 1909
Command Mode
User Exec, Privileged Exec mode, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays detailed VRRP status.
console# show vrrp
Admin Mode..................................... Enable
Router Checksum Errors......................... 0
Router Version Errors.......................... 0
Router VRID Errors............................. 0
Vlan 7 – Group 1
Primary IP Address............................. 192.168.5.55
VMAC Address................................... 0000.5E00.0101
Authentication Type............................ None
Priority....................................... 60
Configured Priority............................ 100
Advertisement Interval (secs).................. 10
Accept Mode.................................... Enable
Pre-empt Mode.................................. Enable
Pre-empt Delay.................................. Enable
Administrative Mode............................ Enable
State.......................................... Initialized
Timers Learn Mode................................ Enable
Description .....................................
Track Interface................................ vlan 3
Track Interface State ......................... Down
Track Interface DecrementPriority ............. 20
Track Route (pfx/len) ......................... 10.10.10.0/24
Track Route Reachable ......................... False
Track Route DecrementPriority ................. 20
Vlan 7 – Group 2
Primary IP Address............................. 192.168.5.65
VMAC Address................................... 0000.5E00.0202
Authentication Type............................ None
Priority....................................... 60
Configured Priority............................ 100
2CSNXXX_SWUM204.book Page 1909 Monday, January 25, 2016 1:25 PM