Administrator Guide

Layer 3 Routing Commands 1913
show vrrp interface stats
Use the show vrrp interface stats command in User Exec mode to display the
statistical information about each virtual router configured on the switch.
Syntax
show vrrp interface stats vlan vlan-id vr-id
• vlan-id — Valid VLAN ID.
•
vr-id — The virtual router identifier. (Range: 1-255)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays all statistical information about the VLAN 15
virtual router.
console#show vrrp interface stats vlan 15 5
UpTime..................... 0 days 0 hrs 0 mins 0 secs
Protocol....................................... IP
State Transitioned to Master................... 0
Advertisement Received......................... 0
Advertisement Interval Errors.................. 0
Authentication Failure......................... 0
IP TTL Errors.................................. 0
Zero Priority Packets Received................. 0
Zero Priority Packets Sent..................... 0
Invalid Type Packets Received.................. 0
Address List Errors ........................... 0
Invalid Authentication Type.................... 0
Authentication Type Mismatch................... 0
Packet Length Errors........................... 0
2CSNXXX_SWUM204.book Page 1913 Monday, January 25, 2016 1:25 PM