Administrator Guide

Switch Management Commands 1926
boot host autoreboot
Use the boot host autoreboot command in Global Configuration mode to
enable rebooting the device (no administrative intervention) when the auto-
image is successfully downloaded. Use the no form of this command to
disable rebooting the device (no administrative intervention) when the auto-
image is successfully downloaded.
Syntax
boot host autoreboot
no boot host autoreboot
Default Configuration
The default value is enabled.
Command Mode
Global Configuration mode
User Guidelines
The configuration on the master switch controls the stack as if it is a single
switch. No configuration steps need to be taken on the member switches to
enable rebooting the member switches after auto-image download.
Example
console#
console#configure
console(config)#boot host autoreboot
console(config)#no boot host autoreboot
boot host autosave
Use the boot host autosave command in Global Configuration mode to
enable automatically saving the downloaded configuration on the switch. Use
the no form of this command to disable automatically saving the downloaded
configuration on the switch.
2CSNXXX_SWUM204.book Page 1926 Monday, January 25, 2016 1:25 PM