Administrator Guide

Switch Management Commands 1929
console(config)#no boot host retrycount
show auto-copy-sw
Use the show auto-copy-sw command in Privileged Exec mode to display
Stack Firmware Synchronization configuration status.
Syntax
show auto-copy-sw
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
The show switch command also displays the switch firmware synchronization
status.
Example
console#show auto-copy-sw
Stack Firmware Synchronization
Synchronization: Enabled
SNMP Trap status: Enabled
Allow Downgrade: Enabled
show boot
Use the show boot command in Privileged Exec mode to display the auto
install configuration and the status.
Syntax
show boot
2CSNXXX_SWUM204.book Page 1929 Monday, January 25, 2016 1:25 PM