Administrator Guide

Dell Networking CLI 192
Router Discovery Protocol
show ipv6 ospf interface Displays the information for the IFO object or
virtual interface tables.
PE
show ipv6 ospf interface
brief
Displays brief information for the IFO object or
virtual interface tables.
PE
show ipv6 ospf interface
stats
Displays the statistics for a specific interface. UE
show ipv6 ospf interface
vlan
Displays OSPFv3 configuration and status
information for a specific VLAN.
PE
show ipv6 ospf neighbor Displays information about OSPF neighbors. PE
show ipv6 ospf range Displays information about the area ranges for
the specified area identifier.
PE
show ipv6 ospf stub table Displays the OSPF stub table. PE
show ipv6 ospf virtual-
links
Displays the OSPF Virtual Interface information
for a specific area and neighbor.
PE
show ipv6 ospf virtual-
link brief
Displays the OSPFV3 Virtual Interface
information for all areas in the system.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
encapsulation Enables Router Discovery on an interface. IC
ip irdp holdtime Configures the value, in seconds, of the
holdtime field of the router advertisement sent
from this interface.
IC
ip irdp maxadvertinterval Configures the maximum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp minadvertinterval Configures the minimum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp multicast Sends router advertisements as IP multicast
packets.
IC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 192 Monday, January 25, 2016 1:25 PM