Administrator Guide

Switch Management Commands 1940
Commands in this Section
This section explains the following commands:
show sntp configuration
Use the show sntp configuration command in Privileged Exec mode to show
the configuration of the Simple Network Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the current SNTP configuration of the
device.
show sntp configuration sntp trusted-key
show sntp server sntp unicast client enable
show sntp status clock timezone hours-offset
sntp authenticate no clock timezone
sntp authentication-key clock summer-time recurring
sntp broadcast client enable clock summer-time date
sntp client poll timer no clock summer-time
sntp server show clock
sntp source-interface
–
2CSNXXX_SWUM204.book Page 1940 Monday, January 25, 2016 1:25 PM