Administrator Guide

Switch Management Commands 1941
console#show sntp configuration
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys: No trusted keys
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server Key Polling Priority Source I/F
--------- ----------- ----------- -------- ----------
10.27.128.21 Disabled Enabled 1 Loopback 1
show sntp server
Use the show sntp server command in Privileged Exec mode to display the
preconfigured SNTP servers. The configured servers can be either IPv4 or
IPv6 format.
Syntax
show sntp server
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Examples
console#show sntp server
Server Host Address: 2001::01
Server Type: IPv6
Server Stratum: 2
Server Reference Id: NTP Srv: 158.108.96.32
Server Mode: Server
Server Maximum Entries: 3
2CSNXXX_SWUM204.book Page 1941 Monday, January 25, 2016 1:25 PM