Administrator Guide

Switch Management Commands 1977
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the active system image file that the device
loads at startup.
console(config)#show bootvar
Image Descriptions
active :
backup :
Images currently available on Flash
unit active backup current-active next-active
----- ------------ ------------ ----------------- -----------------
1 6.0.0.0 9.25.16.57 6.0.0.0 6.0.0.0
show running-config
Use the show running-config command in Privileged Exec mode to display
the contents of the currently running configuration file, including banner
configuration.
NOTE: All non-default configurations for the Captive Portal branding images and
encoded Unicode are not displayed via the standard show running-config
command. If desired, you can view this data in the script files or by using the all
mode for the show running-config command. In addition, please note that this non-
readable data is contained and displayed at the end of the script files.
2CSNXXX_SWUM204.book Page 1977 Monday, January 25, 2016 1:25 PM