Administrator Guide

Switch Management Commands 1980
console(config)#show startup-config
!Current Configuration:
!System Description "Dell Networking N4064F, 6.1.0.1, Linux 2.6.32.9"
!System Software Version 6.1.0.1
!Cut-through mode is configured as disabled
!
configure
slot 1/0 5 ! Dell Networking N4064F
slot 1/1 8 ! Dell 10GBase-T Card
stack
member 1 4 ! N4064F
exit
interface vlan 1
exit
snmp-server engineid local 800002a203000277994433
exit
write
Use the write command to copy the running configuration image to the
startup configuration.
Syntax
write
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command is equivalent to the copy running-config startup-config
command functionally.
Example
console#write
2CSNXXX_SWUM204.book Page 1980 Monday, January 25, 2016 1:25 PM