Administrator Guide

Dell Networking CLI 197
Switch Management Commands
Application Deployment
Auto-Install
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
application install Installs or removes a Dell-supplied
application.
GC
application start Schedules a Dell-supplied application for
immediate execution on the stack master.
GC
application stop
Stops a Dell-supplied application if the
application is executing on the stack
master.
GC
show application Displays installed applications and
optionally displays application files.
GC
Command Description Mode
a
boot auto-copy-sw Enables or disables Stack Firmware
Synchronization.
GC
boot auto-copy-sw allow-
downgrade
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
GC
boot host autoreboot Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
GC
boot host autosave Enables/disables automatically saving the
downloaded configuration on the switch.
GC
boot host dhcp Enables/disables Auto Config on the switch. GC
boot host retrycount Set the number of attempts to download a
configuration.
GC
show auto-copy-sw Displays Stack Firmware Synchronization
configuration status.
PE
2CSNXXX_SWUM204.book Page 197 Monday, January 25, 2016 1:25 PM