Administrator Guide

Switch Management Commands 1996
• list-name —Character string of not more than 15 characters used to name
the list of accounting methods. The list name can consist of any printable
character other than a question mark. Use quotes around the list name if
embedded blanks are contained in the list name.
Default Configuration
Accounting is not enabled by default.
Command Mode
Line Configuration
User Guidelines
When enabling accounting for exec mode for the current line-configuration
type, users logged in with that mode will be logged out.
Examples
Use the following command to enable exec type accounting for telnet.
console(config)#line telnet
console(config-telnet)# accounting exec default
authorization
Use the authorization command to apply a command authorization method
to a line config. Use the no form of the command to return the authorization
for the line mode to the default.
Syntax
authorization {commands|exec} [default| list-name ]
no authorization {commands|exec}
• commands —Perform authorization for each command entered by the
user.
•
exec —Perform Exec authorization for the user (authorization required to
enter privileged Exec mode).
•
default —The default list of methods for command authorization
(cmdAuthList).
2CSNXXX_SWUM204.book Page 1996 Monday, January 25, 2016 1:25 PM