Administrator Guide

Switch Management Commands 2004
Example
console(config-telnet)# no login-banner
motd-banner
Use the motd-banner command to enable motd on the console, telnet or
SSH connection. To disable, use the no form of the command.
Syntax
motd-banner
no motd-banner
• MESSAGE — Quoted text
Default Configuration
This command has no default configuration.
Command Mode
Line Configuration
User Guidelines
This command has no user guidelines.
Example
console(config-telnet)# motd-banner
password (Line Configuration)
Use the password command in Line Configuration mode to specify a
password on a line. To remove the password, use the no form of this
command.
NOTE: For commands that configure password properties, see Password
Management Commands on page 1057.
Syntax
password password [encrypted]
no password
2CSNXXX_SWUM204.book Page 2004 Monday, January 25, 2016 1:25 PM