Administrator Guide

Switch Management Commands 2005
• password — Password for this level. (Range: 8- 64 characters) The special
characters allowed in the password include ! # $ % & ‘ ( ) * + , - . /
: ; < = > @ [ \ ] ^ _ ` { | } ~. User names can contain blanks if
the name is surrounded by double quotes.
•
encrypted — Encrypted password to be entered, copied from another
switch configuration.
Default Configuration
No password is specified.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies a password "mcmxxyyy" on a line.
console(config-line)# password mcmxxyyy
show line
Use the show line command in User Exec or Privileged Exec modes to display
line parameters.
Syntax
show line [console | telnet | ssh]
• console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 2005 Monday, January 25, 2016 1:25 PM