Administrator Guide

Switch Management Commands 2023
Syntax
power inline priority {critical | high | low}
no power inline priority
Command Mode
Interface Configuration (Ethernet).
User Guidelines
Priority is always enabled for all ports. If all ports have equal priority in an
overload condition, the switch will shut down the lowest numbered ports
first.
Default Value
Low
Examples
console(config)#interface gigabitethernet 1/0/1
console(config-if-Gi1/0/1)# power inline priority high
power inline reset
Use the power inline reset command to reset the port.
Syntax
power inline reset
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration
User Guidelines
This command is useful if the port is stuck in an Error state. Power to the
powered devices may be interrupted as the port is reset.
2CSNXXX_SWUM204.book Page 2023 Monday, January 25, 2016 1:25 PM