Administrator Guide

Switch Management Commands 2024
power inline usage-threshold
The power inline usage-threshold command configures the system power
usage threshold level at which lower priority ports are disconnected. The
threshold is configured as a percentage of the total available power. Use the
no form of the command to set the threshold to the default value.
Syntax
power inline usage-threshold threshold
no power inline usage-threshold
• threshold — Power threshold at which ports are disconnected. The range is
1-99%.
Default Configuration
The default threshold is 90%.
Command Mode
Global Configuration.
User Guidelines
The power limit beyond which ports are disconnected has a configurable
range as a percentage of total available power. The maximum power available
is given in the table shown in the power inline management command. When
ports are disconnected due to the threshold being exceeded, a trap is
generated.
Examples
console(config)# power inline usage-threshold 90
clear power inline statistics
Use this command to clear the PoE statistics.
Syntax
clear power inline statistics interface-id
• interface-id —An Ethernet interface capable of supplying PoE power.
2CSNXXX_SWUM204.book Page 2024 Monday, January 25, 2016 1:25 PM