Administrator Guide

Switch Management Commands 2025
Default Configuration
This command has no default configuration.
Command Modes
Privileged Exec
User Guidelines
This command has no user guidelines.
show power inline
Use the show power inline command to report current PoE configuration and
status. If no port is specified, the command displays global configuration and
status of all the ports. If a port is specified, then the command displays the
details for the single port. Use the detailed parameter to show power limits,
detection type and high power mode for the interface.
Syntax
show power inline [ interface-id ] [detailed]
• interface-id —Any physical interface. See Interface Naming Conventions
for interface representation.
Command Mode
Privileged Exec
User Guidelines
No specific guidelines.
Examples
In the next example, the port is specified and the command displays the
configuration and status for the specified port.
console#show power inline gigabitethernet 1/0/13
Port Powered Device State Priority Status Class[W] Power[mW]
----- --------------- ----- -------- --------- ------------- ------
Gi1/0/13 Auto Low On 3.84 - 6.49 5000
2CSNXXX_SWUM204.book Page 2025 Monday, January 25, 2016 1:25 PM