Administrator Guide

Switch Management Commands 2026
Overload Counter............................... 0
Short Counter ................................. 0
Denied Counter................................. 0
Absent Counter................................. 0
Invalid Signature Counter...................... 0
Output Volts................................... 53
Output Current................................. 0
Temperature.................................... 39
In the next example, the port is specified and the command displays the
details for the single port.
console#show power inline gigabitethernet 1/0/13
Port Powered Device State Priority Status Class[W] Power[mW]
----- ------------------------ ----- -------- --------- ------------- ------
1/0/13 auto Low On 3.84 - 6.49 5000
Overload Counter............................... 0
Short Counter ................................. 0
Denied Counter................................. 0
Absent Counter................................. 0
Invalid Signature Counter...................... 0
Output Volts................................... 53
Output Current................................. 0
Temperature.................................... 39
show power inline firmware-version
Use the show power inline firmware-version command in Privileged Exec
mode to display the version of the PoE controller firmware present on the
switch file system.
Syntax
show power inline firmware-version
Command Mode
Privileged Exec
User Guidelines
This command has no user guidelines.
2CSNXXX_SWUM204.book Page 2026 Monday, January 25, 2016 1:25 PM