Administrator Guide

Switch Management Commands 2030
Default Configuration
No alarms are configured.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the following alarm conditions:
•Alarm index — 1
•Variable identifier — 1.3.6.1.2.1.2.2.1.10.5
• Sample interval — 10 seconds
• Rising threshold — 500000
• Falling threshold — 10
• Rising threshold event index — 1
• Falling threshold event index — 1
console(config)#rmon alarm 1 1.3.6.1.2.1.2.2.1.1.10.5 10 50000 10 1 1
rmon collection history
Use the rmon collection history command in Interface Configuration mode
to enable a Remote Monitoring (RMON) MIB history statistics group on an
interface. To remove a specified RMON history statistics group, use the no
form of this command. Also see the
show rmon collection history command.
Syntax
rmon collection history index [owner ownername ] [buckets bucket-number ]
[interval
seconds ]
no rmon collection history
index
• index — The requested statistics index group. (Range: 1–65535)
2CSNXXX_SWUM204.book Page 2030 Monday, January 25, 2016 1:25 PM