Administrator Guide

Switch Management Commands 2031
• owner ownername — Records the RMON statistics group owner name. If
unspecified, the name is an empty string.
•
buckets bucket-number — A value associated with the number of buckets
specified for the RMON collection history group of statistics. If
unspecified, defaults to 50. (Range: 1 - 65535)
•
interval seconds — The number of seconds in each polling cycle. If
unspecified, defaults to 1800. (Range: 1–3600)
Default Configuration
The buckets configuration is 50. The interval configuration is 1800 seconds.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet,
fortygigabitethernet) mode.
User Guidelines
This command cannot be executed on multiple ports using the interface
range command.
Example
The following example enables a Remote Monitoring (RMON) MIB history
statistics group on port 1/0/8 with the index number "1" and a polling interval
period of 2400 seconds.
console(config)#interface gigabitethernet 1/0/8
console(config-if-Gi1/0/8)#rmon collection history 1 interval 2400
rmon event
Use the rmon event command in Global Configuration mode to configure an
event. To remove an event, use the no form of this command. See also the
show rmon events command.
Syntax
rmon event number [log] [trap community ] [description string ] [owner
string ]
no rmon event
number
2CSNXXX_SWUM204.book Page 2031 Monday, January 25, 2016 1:25 PM