Administrator Guide

Switch Management Commands 2034
Example
console(config)# rmon hcalarm 2 ifInOctets.1 30 absolute rising-threshold
high 2147483648 falling-threshold high -2147483648 startup rising owner
"dell-owner"
show rmon alarm
Use the show rmon alarm command in User Exec mode to display alarm
configuration. Also see the
rmon alarm command.
Syntax
show rmon alarm number
• number — Alarm index. (Range: 1–65535)
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays RMON 1 alarms.
console> show rmon alarm 1
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
Startup Alarm: rising
Rising Threshold: 8700000
Falling Threshold: 78
Rising Event: 1
Falling Event: 1
Owner: CLI
The following table describes the significant fields shown in the display:
2CSNXXX_SWUM204.book Page 2034 Monday, January 25, 2016 1:25 PM