Administrator Guide

Dell Networking CLI 203
Power Over Ethernet (PoE)
show fiber-ports optical-
transceiver
Displays the optical transceiver diagnostics. PE
test copper-port tdr Diagnoses with TDR (Time Domain
Reflectometry) technology the quality and
characteristics of a copper cable attached to a
port.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
power inline Enables/disables the ability of the port to
deliver power.
IC
(Ethernet)
power inline detection Configures the detection type that tells
which types of PD’s will be detected and
powered by the switch.
IC
power inline four-pair
forced
Forces 4-pair power feed on an
interface.
IC
power inline high-power Configures the port high power mode. IC
power inline management Sets the power management type. GC
power inline powered-
device
Adds a comment or description of the
powered device type.
IC
(Ethernet)
power inline priority Configures the port priority level for the
delivery of power to an attached device.
IC
(Ethernet)
power inline reset Use to reset the port. IC
power inline usage-
threshold
Configures the system power usage
threshold level at which lower priority
ports are disconnected.
GC
clear power inline statistics Clears the PoE statistics. PE
show power inline Reports current PoE configuration and
status.
PE
show power inline
firmware-version
Displays the version of the PoE controller
firmware present on the switch file system.
PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 203 Monday, January 25, 2016 1:25 PM