Administrator Guide

Switch Management Commands 2051
Syntax
debug auto-voip [ H323 | SCCP | SIP ]
no debug auto-voip [ H323 | SCCP | SIP ]
Default Configuration
Auto VOIP tracing is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug auto-voip
debug bfd
Use this command to enable the display of BFD events or packets.
Syntax
debug bfd { packet | event }
no debug bfd { packet | event }
• packet —Display BFD control packets.
•
event —Display BFD state transition events.
Default Configuration
Debug is disabled by default.
Command Mode
Privileged Exec
2CSNXXX_SWUM204.book Page 2051 Monday, January 25, 2016 1:25 PM